The STREAM Disinfectant Generator provides a continuous flow of disinfectant solution from common salt and electricity. The chlorine-based solution generated by the STREAM System complies with national and international guidelines for disinfecting surfaces, medical devices, and instruments. The STREAM Disinfectant Generator is ideal for rural and urban hospitals and health clinics, drinking water treatment in small communities, disaster relief, and humanitarian aid.
The STREAM system can produce enough disinfectant to treat up to 240,000 liters (60,000 gallons) per day of water. The unit operates on most power supplies including 110/220 VAC single phase, and 12 volts DC such as a car battery or solar panel. It is built into a hard plastic waterproof case. All of the components in the system are water resistant and can be operated in a humid environment. The unit is fully automated ensuring a consistent chlorine concentration of 5,000 mg/L. 5,000 mg/L is the standard concentration for cleaning hospital settings and is easily diluted for hand washing at 500 mg/L or 2,000 to 1 for drinking water applications at 2.5 mg/L dose, or 1,000 to 1 for a 5.0 mg/L dose.
The STREAM system comes with a GPS transmitter and wifi transmitter. This enables the system to be monitored anywhere in the world for data collection and analysis, operating status, and any fault conditions.
The system comes with all peripheral components including:
• Measuring Devices
• Salt Storage Container
• Brine Filter & Container with spare brine filter
• Water Hardness Test Strip Chlorine Test Strips
• Spare – Pump Hose
• Electrical Adapter US/UK Plug
• Flash-drive with Training Videos
To download the spec sheet for the STREAM System, click here.
Here is an introduction video on the STREAM Disinfectant Generator: