The SPRING® Disinfectant Generator is a fully automated version of the STREAM® system, available in two different sizes. The SPRING® provides a continuous flow of disinfectant solution from common salt and electricity. The system package includes water softening for hard water feed conditions and a brine generator that avoids manual mixing of the brine solution, allowing for weeks of automated operation without intervention. The system also incorporates a chlorine solution storage tank with a high and low level switch to automatically stop and start the system, ensuring the solution storage tank is kept full. The SPRING® Disinfectant Generator is ideal for industrial applications like cooling towers or food and beverage process water, drinking water treatment in small communities, and surface sanitation in remote healthcare settings. The chlorine-based solution generated by the SPRING® System complies with national and international healthcare guidelines for disinfecting surfaces, medical devices, and instruments.
The SPRING MOS 1.3® system can treat up to 60,000 gallons (230 m3) per day of water at a dose of 2.5 mg/l, while the SPRING MOS 2.6 can treat up to 120,000 gallons (460 m3) per day at a dose of 2.5 mg/L. The unit operates on most power supplies including 110/220 VAC single phase and 12 to 15 volts DC, such as a car battery or solar panel. It is mounted on two panels for easy wall mounting. The upper panel includes the chlorine generator system with power supply, control box, and electrolytic cell. The lower panel includes the reverse osmosis (RO) system for softening to avoid scale formation in the system. The system can be sold with or without the lower panel. An ion exchange water softener system can be used in place of the RO system. All of the components in the system are water resistant and can be exposed to humid conditions, but is is best located in an enclosed room. The unit is fully automated, ensuring a consistent chlorine concentration of 5,000 mg/l, which is the standard concentration for cleaning hospital settings, is easily diluted 10:1 for hand washing at 500 mg/l, or can be diluted 2,000:1 for drinking water applications at 2.5 mg/l dose.
The SPRING® system comes with a GPS transmitter and wifi transmitter. This enables the system to be monitored anywhere in the world for data collection and analysis, operating status, and any fault conditions.
The system comes with all peripheral components including:
• Measuring devices
• 36 gallon (136 L) brine generation system
• 36 gallon (136 L) solution storage tank with high and low level switches
• Chlorine test strips
• Spare – Pump Hoses
• Electrical adapter US/UK plug
• Flash-drive with training videos
To download the spec sheet for the SPRING Series® System, click here.